Key Features
• Up to 24 NVMe drives supported
• Flexible Networking Options
Processor: 1 x Intel® Xeon® Processor SKL-SP 4110 8C/16T 2.1G 11M 9.6GT UPI
Memory: 16GB DDR4.
Network Controller: 4 10GBase-T LAN ports with Intel X550
Raid: SATA3 (6Gbps); RAID 0, 1, 5, 10
Storages: 24 Hot-swap 2.5″ drive bays;
Power: 1600W Redundant Power Supplies
Form Factor: Rackmount
1. Dual socket P (LGA 3647) supports Intel® Xeon® Scalable Processors, Dual UPI up to 10.4GT/s
2. Up to 3TB ECC 3DS LRDIMM or RDIMM, up to DDR4-2666MHz; 24 DIMM slots
3. 2 PCI-E 3.0 x16 slots (FH, 10.5″ L), 1 PCI-E 3.0 x8 slot (LP)
4. 4 10GBase-T LAN ports with Intel X550
5. 24 Hot-swap 2.5″ drive bays; 24 NVMe (4 hybrid ports – SAS3 via opt. AOC), 2 rear Hot-swap 2.5″ drive bays; 2 internal M.2 (1 SATA3, 1 NVMe)
6. 4 Heavy duty 8cm PWM fans
7. 1600W High efficiency (96%) Redundant PSU; Titanium Level
Product SKUs
SYS-2029U-TN24R4T
• SuperServer 2029U-TN24R4T (Black)
Motherboard
Super X11DPU
Processor/Cache
CPU
• Dual Socket P (LGA 3647)
• Intel® Xeon® Scalable Processors,
Dual UPI up to 10.4GT/s
• Support CPU TDP 70-205W
Cores
• Up to 28 Cores with Intel® HT Technology
System Memory
Memory Capacity
• 24 DIMM slots
• Up to 3TB ECC 3DS LRDIMM, 3TB ECC RDIMM, DDR4 up to 2666MHz
Memory Type
• 2666/2400/2133MHz ECC DDR4 SDRAM
On-Board Devices
Chipset
• Intel® C621 chipset
Storage
• SATA3 (6Gbps); RAID 0, 1, 5, 10 per node
Network Connectivity
• 4x 10GBase-T ports via Intel® X550 Ethernet Controller
• 1x Realtek RTL8211E PHY (dedicated IPMI)
IPMI
• Support for Intelligent Platform Management Interface v.2.0
• IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Graphics
• ASPEED AST2500 BMC
Input / Output
NVMe
• 24 NVMe ports
LAN
• 4 10GBase-T LAN ports
• 1 RJ45 Dedicated IPMI LAN port
USB
• 3 USB 3.0 ports (2 rear, 1 Type A)
Video
• 2 VGA ports (1 rear, 1 onboard)
Serial Port / Header
• 1 Serial port
DOM
• 2 SuperDOM (Disk on Module) ports
System BIOS
BIOS Type
• AMI 32Mb SPI Flash ROM
Management
Software • Intel® Node Manager
• Redfish API
• IPMI 2.0
• KVM with dedicated LAN
• NMI
• SSM, SPM, SUM
• SuperDoctor® 5
Power Configurations
• ACPI Power Management
PC Health Monitoring
CPU
• Monitors for CPU Cores, Chipset Voltages, Memory.
• 4+1 Phase-switching voltage regulator
FAN
• Fans with tachometer monitoring
• Status monitor for speed control
• Pulse Width Modulated (PWM) fan connectors
Temperature
• Monitoring for CPU and chassis environment
• Thermal Control for fan connectors
Chassis
Form Factor
• 2U Rackmount
Model
• CSE-219AC24-R1K62P-N24T
Dimensions and Weight
Width • 17.2" (437mm)
Height • 3.5" (89mm)
Depth • 27.76" (705.3mm)
Weight • Net Weight: 39 lbs (17.7 kg)
• Gross Weight: 63 lbs (28.6 kg)
Available Colors
• Black
Front Panel
Buttons
• Power On/Off button
• System Reset button
LEDs
• Power status LED
• HDD activity LED
• Network activity LEDs
• System information (overheat/UID) LED
Expansion Slots
PCI-Express
• 2 PCI-E 3.0 x16 (FH, 10.5" L)
• 1 PCI-E 3.0 x8 (LP)
(Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram and AOC Support for details.)
Drive Bays
Hot-swap
• 24 Hot-swap 2.5" drive bays: 24 NVMe (4 hybrid ports - SAS3 via opt. AOC)
• 2 rear Hot-swap 2.5" SATA drive bays
M.2
• 1 M.2 NVMe (2242/2260/2280*/22110*)
• 1 M.2 SATA (2242/2260/2280*/22110*) via optional SATA cable
* Not supported if installing both NVMe & SATA M.2
System Cooling
Fans
• 4 Heavy duty 8cm PWM fans
Power Supply
1600W Redundant Power Supplies with PMBus
Total Output Power
• 1000W/1600W
Dimension (W x H x L)
• 73.5 x 40 x 203 mm
Input
• 100-127Vac / 13 - 9A / 50-60Hz
• 200-240Vac / 10 - 8A / 50-60Hz
+12V
• Max: 83.3A / Min: 0A (100-127Vac)
• Max: 133A / Min: 0A (200-240Vac)
12Vsb
• Max: 2.1A / Min: 0A
Output Type
• 25 Pairs Gold Finger Connector