Thông số kỹ thuật
Product SKUs
SYS-6029U-E1CRT SuperServer 6029U-E1CRT (Black)
Motherboard
Super X11DPU
Processor/Cache
CPU Dual Socket P (LGA 3647)
Intel® Xeon® Scalable Processors, Dual UPI up to 10.4GT/s
Support CPU TDP 70-205W
Cores Up to 28 Cores with Intel® HT Technology
System Memory
Memory Capacity 24 DIMM slots
Up to 3TB ECC 3DS LRDIMM, 3TB ECC RDIMM, DDR4 up to 2666MHz
Memory Type
2666/2400/2133MHz ECC DDR4 SDRAM
2666 ECC DDR4 NVDIMM
On-Board Devices
Chipset Intel® C621 chipset
SATA
SATA3 (6Gbps) with
RAID 0, 1, 5, 10
Network Connectivity 2 10GBase-T ports via AOC-2UR68-I2XT (Intel X540)
IPMI
Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Graphics ASPEED AST2500 BMC
Input / Output
SAS
12 SAS3 ports via expander and AOC
LAN
2 RJ45 10GBase-T Ethernet LAN ports
1 RJ45 Dedicated IPMI LAN port
USB
3 USB 3.0 ports (2 rear, 1 Type A)
Video 2 VGA ports (1 rear, 1 onboard)
Serial Port / Header 1 Serial header
DOM 2 SuperDOM (Disk on Module) ports
System BIOS
BIOS Type AMI 32Mb SPI Flash ROM
Management
Software
Intel® Node Manager
IPMI 2.0
KVM with dedicated LAN
NMI
SSM, SPM, SUM
SuperDoctor® 5
Power Configurations
ACPI Power Management
PC Health Monitoring
CPU Monitors for CPU Cores, Chipset Voltages, Memory.
4+1 Phase-switching voltage regulator
FAN
Fans with tachometer monitoring
Status monitor for speed control
Pulse Width Modulated (PWM) fan connectors
Temperature
Monitoring for CPU and chassis environment
Thermal Control for fan connectors
Chassis
Form Factor 2U Rackmount
Model CSE-829U2E1C4-R1K02-T
Dimensions and Weight
Width 17.2" (437mm)
Height 3.5" (89mm)
Depth 28.46" (723mm)
Weight
Net Weight: 36 lbs (16.4 kg)
Gross Weight: 72 lbs (32.7 kg)
Available Colors Black
Front Panel
Buttons
Power On/Off button
System Reset button
LEDs
Power status LED
HDD activity LED
Network activity LEDs
System information (overheat/UID) LED
Expansion Slots
PCI-Express
1 PCI-E 3.0 x16 (FH, 10.5" L)
5 PCI-E 3.0 x8 (FH, 10.5" L)
1 PCI-E 3.0 x8 (LP)
1 PCI-E 3.0 x8 (internal LP)
(Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram and AOC Support for details.)
Drive Bays / Storage
Hot-swap
12 Hot-swap 3.5" drive bays
12 SAS3 via opt. AOC (4 hybrid ports - opt. 4 NVMe)
Note: Storage Add-on card is required
M.2
1 M.2
NVMe and 1 M.2 SATA3 via optional riser card RSC-UMR-8 and cable CBL-SAST-0538 (2240/2260/2280/22110)
2 M.2
NVMe via optional add-on card AOC-SLG3-2M2 (2260/2280/22110)
Backplane
2U SAS/SATA backplane
System Cooling
Fans
4 Heavy duty 8cm PWM fans
Power Supply
1000W Redundant Power Supplies with PMBus
